Contamination Control Breathers

Air Sentry® Breathers replace the standard breather cap or vent tube on a tank or reservoir. They are easy to install using one of several adapters designed for different applications. When the fluid in the system is lowered, or pressure changes occur, air is drawn in through openings under the breather cap. First, air passes through a fine, 2 micron solid particle filter. The air then passes through a diffuser to ensure maximum effectiveness within the silica gel chamber.

Next, water vapor is removed as the air travels through a bed of silica gel - the highest capacity adsorbent available. After being dried, the air passes through a second 2 micron solid particle filter and enters the reservoir CLEAN AND DRY!

Air Sentry® Breathers use a three-stage filtration design to ensure optimum protection by removing water vapor and solid contaminants before they enter the fluid system. Every mixer gear box should have an Air Sentry® Breather.

www.airsentry.net